TruColor™ Calibration is the
process of making all light fixtures consistent in terms of the colors emitted.
This technology will allow all fixtures to produce the same color temperature
regardless of batch or model.
Example: A user can choose 6000K White from an AX3 Lightdrop™, and then
choose 6000K White from an AX10 Spotmax™, and both whites will be identical. The
same applies to all colors and color temperatures.
Process
With TruColor™ Calibration, every
single fixture is tested by a modified spectrometer which is attached to
an integrated sphere, and every color is measured against the color index and
adjusted accordingly. An extensive algorithm, written by Astera R&D
specialists, automatically calibrates the brightness of each LED to ensure the
fixture matches the standard index colors. Once the calibration is stored within the fixture, all fixtures from all batches will produce consistent colors. Astera has
achieved complete color consistency.
Currently, there are only a handful of
companies that have similar technology, and thus, most other LED companies will
deliver inconsistent colors.
Features
The difference between the colors
of light produced in one batch of Astera lights compared to another is so
minute that it is not noticeable to the human eye. Astera can produce any color
in the color spectrum and can automatically match any color temperature.
With TruColor™ Calibration there are
also dynamic power-boost and controlled-runtime features which support the application of the TruColor™ technology. Dynamic power-boost increases the power output of each light (making it brighter) while making
sure the color point remains unaffected. Controlled-runtime is a feature
designed to automatically adjust the brightness of each fixture to ensure
optimal operation for any period set by the user.
Please use the comments section below if you have any questions regarding TruColor™ Calibration. Alternatively, you can contact marketing@astera-led.com
Fantastic!
ReplyDelete