Wireless Light Accessories

The obvious benefit of wireless lights is that they are easily portable and attachable to pretty much any surface or structure in the event environment. Astera wireless lights were designed for just that. Applying to truss structures, walls, tables, rails, ceilings and many other structures is very easy with the new X-Series (especially the AX3 Lightdrop™).

Here is a breakdown of all the accessorizing options of the X-Series:

LIGHTDROP™ (AX3) - view product page

The Lightdrop™ has tons of accessories and plenty of uses.

Firstly, the Lightdrop™ can attach diffusors to alter the light spread from its standard 13° to a wider beam angle like 30° (for flood effect), 120° (for ambience spots), 17°x 46° (for wall wash effect) and a 270° diffusor dome (for inside translucent objects).

Secondly, it has a bracket for adjusting its beam when up lighting. But the bracket is also useful for attaching clamps for use with truss structures. The knobs on the bracket for adjusting its position are also useful for screwing in smaller clamps (for attaching to tables, rails etc.).

The Lightdrop™ can be attached to metallic surfaces without the need for clamps, as it has a magnetic underside, and for vertical suspension, it comes with 3 free hooks for screwing in to the back. Lastly, and referring back to the wall wash diffusor mentioned earlier, the Lightdrop™ comes with a tilt adjuster built into its housing, which means that it can be used as a wall washer with inclinations up to 13 degrees.

+++

SPOTLITE™ (AX7) - view data sheet

The SpotLite™ has very few accessories, but it’s no less impressive because of it. Diffusors are available which alter the beam angle, which is great for different types of event environment. The standard angle of the SpotLite™ is 13°, with a flood diffusors available at 32° beam angle, and a wallwash diffusor available at 17°x 46° beam angle (below).

It can also be attached to truss structures with an 8mm threaded Manfrotto super clamp (right).

+++

SPOTMAX™ (AX10) - view product page

The SpotMax™ is just as accessorized as the SpotLite™. Diffusors are available which alter the beam angle, which is great for different types of event environment. The standard angle of the SpotMax™ is 13°, with a flood diffusors available at 32° beam angle, and a wallwash diffusor available at 17°x 46° beam angle (right).

It can also be attached to truss structures with an 8mm threaded Manfrotto super clamp (above). The SpotMax™ can be adjusted to change the angle of the head in a vertical direction.


Be sure to follow us on Facebook for more news, tips, and updates:

Astera LED Technology

www.astera-led.com